Shenzhen Huayatai Packing machinery Equipment CO.,Ltd

Specializes in the research and development of packaging machinery manufacturers.

Home > News > Content
Packaging Machinery Has A Variety Of Classification Methods
- May 31, 2017 -

Packaging machinery has a variety of classification methods: packaging machine function is divided into single-function packaging machine and multi-function packaging machine; according to the purpose can be divided into within the packaging machine and packaging machine; packaging varieties can be divided into special packaging machines and general packaging Machine; according to the level of automation is divided into semi-automatic machines and automatic machines. The packaging process includes filling, wrapping, sealing and other major processes, as well as its associated before and after the process, such as cleaning, stacking and demolition. In addition, the package also includes metering or printing on the package. As the high-pressure fan can act on the packaging filling, cleaning and other processes, so the high-pressure fan has become a necessary equipment for packaging machinery. The use of mechanical packaging products can improve productivity, reduce labor intensity, meet the needs of large-scale production, and meet the requirements of clean, in which high-pressure fan is also contributed. The following are the same as the "

   In order to better meet the high efficiency of the packaging process, in the packaging machinery to install high-pressure fan similar parts is indeed very important, but in the packaging machinery packaging process to effectively solve the following problems can not be ignored:

    First, the shrinkage machine slow or can not rise to a higher temperature (160 degrees Celsius above) What is the reason?

A: The heater line is the main power line through a magnetic switch to the electric tube, it should first check the magnetic switch contacts are normal. If the line does not pass one of the phases, the above phenomenon will occur. Such as the magnetic switch is normal, you can check the meter, see the phase and the machine's ohm value is the same. If normal should be short circuit. If the phase is connected but the line or electric tube is still abnormal, you need to replace the heater.

    Second, the equipment at work when the film is easy to offset and how to adjust the normal feeding?

A: In the case of equipment in the event of membrane deviation, the adjustment of the membrane roll position and tension balance bar are invalid, you can adjust the angle of the triangle to solve this problem. If the upper layer of material deviation from the folder chain, the upper triangle can be adjusted clockwise; such as the lower layer of material deviation from the folder chain, the upper triangle can be adjusted counterclockwise.

    Third, the packaging 6 bottled packaging, the electric eye can not detect the packaging, the machine is easy to cut into the packaging, how to adjust?

A: The bundles of the bottle packaging will affect the detection of electric eye, then the horizontal electric eye detection angle can be adjusted to bevel. Adjusted to reduce the electrical eye to detect the gap between the packaging of the probability, so as to avoid the phenomenon of chaos in the work.