Shenzhen Huayatai Packing machinery Equipment CO.,Ltd

Specializes in the research and development of packaging machinery manufacturers.

Home > News > Content
Packaging Machinery In The Packaging Process Of The Three Major Issues
- Sep 27, 2017 -

  Packaging machinery in the packaging process of the three major issues

  Packaging machinery refers to the completion of all or part of the product and product packaging process machinery.

  The packaging process includes filling, wrapping, sealing and other major processes, as well as its associated before and after the process, such as cleaning, stacking and demolition. In addition, the package also includes metering or printing on the package. The use of mechanical packaging products can increase productivity, reduce labor intensity, meet the needs of large-scale production, and meet the requirements of hygiene.

  Introduce the following points:

  First, the shrinkage machine slow or can not rise to a higher temperature (160 degrees Celsius above) What is the reason?

  A: The heater line is the main power cord through a magnetic switch to the electric tube, it should first check the magnetic switch contacts are normal. If the line does not pass one of the phases, the above phenomenon will occur. Such as the magnetic switch is normal, you can check the meter to see the phase and the machine's ohm value is the same. If normal should be short circuit. If the phase is connected but the line or electric tube is still abnormal, you need to replace the heater.

  Second, the equipment at work when the film is easy to offset and how to adjust the normal feeding?

  A: In the case of equipment in the event of membrane deviation, the adjustment of the membrane roll position and tension balance bar are invalid, you can adjust the angle of the triangle to solve this problem. If the upper layer material deviation from the clip chain, the upper triangular plate can be adjusted clockwise; if the lower layer of material deviation from the clip chain, the upper triangle can be adjusted counterclockwise.

  Third, the packaging 6 bottled packaging, the electric eye can not detect the packaging, the machine is easy to cut into the packaging, how to adjust?

  A: The bundles of the bottle will affect the detection of electric eye, then the horizontal electric eye detection angle can be adjusted to bevel. Adjusted to reduce the electrical eye to detect the probability of packaging gap, so as to avoid the phenomenon of chaos in the work.