Shenzhen Huayatai Packing machinery Equipment CO.,Ltd

Specializes in the research and development of packaging machinery manufacturers.

Home > News > Content
The Working Principle Of Shrinking Film Packaging Machine
- Jul 11, 2017 -

  The working principle of shrinking film packaging machine

  Shrink film packaging machine is a new type of any combination of automatic laminated kits sealed shrinking film packaging machine, a kink sealing heat shrink film packaging machinery. A feeding frame is arranged on the upper end of the feeding frame and the upper conveyor belt and the upper conveyor belt are arranged on the upper end of the feeding frame. The front end of the feeding frame is connected with a laminated feeding frame, the front end of the laminated feeding frame is a casing sealing and cutting mechanism; And the upper end side of the lifting table is provided with a turning blade, the top of the lifting table is provided with a turning start motor, the middle of the laminated feeding frame is a stacking table; the upper end side of the laminated feeding stent And a count switch for feeding up to the upper conveyor is provided, and the upper end of the stacking feed stand is provided with a bulldozer which is packaged at the upper and lower conveyer belts. At the time of work, depending on the number of packages to be input, you can pack from one item to one hundred or even more items.

  Heat shrink film packaging machine is mainly used for what type of product packaging, such as our common glass bottles, styrofoam, cartons, toys, electronics, electrical appliances, stationery, books, records, hardware tools, daily necessities, medicines, Beverages, fruit, commemorative labels and other items packaging.

  Heat shrinkable film packaging machine there are other uses, for example, bottle cap plastic shrinkers are mainly used for food category of wine, glass bottles, etc., pharmaceutical injection bottle shrink, can effectively seal the bottle to ensure product hygiene The

  Automotive supplies shrink machine also applies to the hotel industry, food industry, pharmaceutical industry.

  Shrink film packaging machine operating process:

  1. First set the heating time for the machine

  2. Press the manual or automatic button, the rack cylinder solenoid valve power output to promote the gear, gear drive chain, then the rear of the rack cylinder close to the switch off. When the rack cylinder runs to the top dead center, the front of the rack cylinder is close to the switch and the oven cylinder solenoid valve is energized.

  3. When the oven runs to the top dead center, the timer starts to start and the rack cylinder solenoid is de-energized.

  4. Timing is over, the oven cylinder solenoid valve is de-energized.

  5. According to the work mode flag, decide whether to continue the next workflow.